AWS Logo
Menu

Building an IPv6-based Amazon EKS Cluster for Globally Scalable Applications

Deploy a preconfigured Amazon EKS cluster optimized for extra-large, global applications using an eksctl "quickstart" template.

eks-cluster-setupekskubernetestutorialseksctl
Ratnopam Chakrabarti
Amazon Employee
Published Aug 30, 2023
Last Modified Apr 26, 2024

Prerequisites

Overview

Step 1: Configure the Cluster

Step 2: Create the Cluster

Step 3: Verify Cluster Node and Pod Health

Step 4: Enable Connectivity Using a Linux Bastion Host

Create a Linux EC2 Bastion Host

Connect to the Linux EC2 Bastion Host

(Optional) Step 5: Deploy a Sample Application

Clean Up

Conclusion

With the explosive growth of the internet and the exponential increase in the number of internet-enabled applications, the need for routable IP addresses has been steadily increasing. With depleting IP addresses in the IPv4 address space, the industry has been transitioning into using IPv6. A number of businesses running containerized applications on Amazon EKS have experienced the IP exhaustion problem, caused by the limited size of the IPv4 address space. Temporary solutions like custom networking on IPv4 or using private NAT gateways involve complex routing configurations. With EKS IPv6 support, businesses can now create EKS clusters where pods are assigned a globally routable IPv6 address, easily scaling applications without consuming limited private IPv4 address space. With 128 bits of address space, IPv6 provides 340 undecillion IP addresses, offering a truly long-term solution to the IP exhaustion problem without needing complex routing mechanisms, while improving network performance. The globally routable IPv6 address can be used to directly communicate with any IPv6 endpoint in Amazon VPC, on-premises network, or the public internet, enabled through the Amazon VPC CNI plugin, which integrates with the EC2 networking stack for high performance and reliability.
About
✅ AWS experience200 - Intermediate
⏱ Time to complete30 minutes
🧩 Prerequisites- AWS Account
📢 FeedbackAny feedback, issues, or just a 👍 / 👎 ?
⏰ Last Updated2023-08-30
This tutorial shows you how to create a managed node groups-based Amazon EKS cluster using an eksctl “quickstart” template. This use case-specific template creates and sets up a cluster optimized for IPv6-enabled applications, ensuring a scalable and efficient solution to the IP exhaustion problem, configured for enhanced networking performance and global reach.
Note that if you're still within your initial 12-month AWS Free Tier period, certain Amazon EC2 instances for managed node groups and additional AWS services may not be included, and charges may apply based on your usage.

Prerequisites

Before you begin this tutorial, you need to:
  • Install the latest version of kubectl. To check your version, run: kubectl version --short.
  • Install the latest version of eksctl. To check your version, run: eksctl info.

Overview

This tutorial is the first part of a series on deploying an IPv6-enabled Amazon EKS cluster, tailored for extra large, modern applications requiring a vast range of IP addresses. Utilizing the eksctl cluster template provided, you'll construct a robust, scalable, and secure Amazon EKS cluster with managed node groups, optimized for IPv6 workloads. This tutorial will guide you in choosing Amazon EC2 Nitro Amazon Linux 2 instance types as worker nodes. The configuration deploys an Amazon IPv6 Virtual Private Cloud (VPC), and requires version “1.10.1” or later of the Amazon VPC CNI Add-On. It configures the following components:
  • Public/Private Networking: The cluster is configured to use the IPv6 IP family, offering a broad range of globally routable IP addresses. By default, Amazon EKS sets up a public endpoint for the managed Kubernetes API server, enabling access via tools like kubectl. For those looking to enhance security, you have the option to configure the cluster API endpoint to be private. This restricts all communication between nodes and the API server to within the Virtual Private Cloud (VPC), eliminating direct exposure to the public internet. With the support for IPv6, this setup provides a flexible networking environment that can be tailored to various access control needs: public access, private access within a VPC, or a combination of both.
  • Add-ons: Latest versions of the following add-ons: "vpc-cni" enable the Amazon VPC Container Network Interface, "coredns" facilitates DNS resolution, and "kube-proxy" maintains network rules on each Amazon EC2 node.
  • Authentication: An OpenID Connect (OIDC) endpoint for authentication within the Amazon EKS cluster to enable communication between Kubernetes pods and AWS services.
  • Node Lifecycle Management: Managed node groups simplify the handling of Amazon EC2 instances, registering them as Kubernetes nodes. This configuration employs m6i.xlarge and m6a.xlarge Amazon Linux 2 (AL2) instance types, optimized for Amazon Linux 2 (AL2). The configuration balances resources, specifying a volume size of "100" and type "gp3". Node groups are tailored with a minimum size of "1" and a maximum size of "3," facilitating manual scaling. Volume encryption enhances security, while custom labels (e.g., “os-distribution: amazon-linux-2”) enhance manageability, allowing the identification and categorization of nodes, and ensuring their alignment with the intended AL2 distribution.

Step 1: Configure the Cluster

In this section, you will configure the Amazon EKS cluster to support IPv6 networking, addressing the growing need for globally routable IP addresses. By creating this cluster-config.yaml file, you'll define the settings for IPv6 networking, public and private access, managed node groups, essential add-ons, and security features like volume encryption. These configurations are essential for ensuring that the cluster is robust, flexible, and secure, with optimized performance for a long-term solution to the IP exhaustion problem and efficient resource management.
To create the cluster config:
  1. Create a cluster-config.yaml file and paste the following contents into it. Replace the sample region.

Step 2: Create the Cluster

Now we're ready to create our Amazon EKS cluster. This process takes several minutes to complete. If you'd like to monitor the status, see the AWS CloudFormation console.
Create the EKS cluster using the cluster-config.yaml.
Note: if you receive an “Error: checking AWS STS access” in the response, be sure to check that you’re using the right user identity for the current shell session. To check the current user identity, run aws sts get-caller-identity in the terminal. Depending on how you configured the AWS CLI, you may also need to specify a named profile (for example, --profile clusteradmin).
Upon completion, you should see the following response output:

Step 3: Verify Cluster Node and Pod Health

Now that you've successfully created the EKS cluster with IPv6 networking, it's a best practice to ensure that the cluster nodes and pods are in a healthy state. This is to ensure that the cluster is healthy and is ready for deployment of applications.
The pods you see should be in a Running or Completed state, and there shouldn't be any pods in an Error or CrashLoopBackOff status. Also confirm that default Pods in the kube-system namespace are assigned IPv6 addresses.
Verify that all of your nodes have reached the Ready state with the following command. It’s also important to note that the nodes have been assigned an IPv6 internal address.
The expected output should look like this:
Additionally, also check that default services are assigned IPv6 addresses.
The expected output should look like this:

Step 4: Enable Connectivity Using a Linux Bastion Host

In an EKS cluster using IPv6, pods and services will be assigned IPv6 addresses. This ensures connectivity for legacy IPv4 endpoints to connect with services running on IPv6 clusters, and for pods to connect with legacy IPv4 endpoints outside the cluster. All pod-to-pod communication within an EKS cluster always operates via IPv6. To test connectivity to applications running on our IPv6 EKS cluster, we'll deploy a Linux bastion host in the VPC named eksctl-ipv6-quickstart-cluster/VPC, which was created when the EKS cluster was initially set up.

Create a Linux EC2 Bastion Host

  1. Open the Amazon EC2 console.
  2. Under “Launch instance”, click the Launch instance button.
    EC2 Dashboard in the AWS console
  3. Enter the following information to customize the instance:
    1. Type ipv6-bastion in Name.
    2. Select t2.micro (or t3.micro for newer regions if not available) for Instance type.
    3. Keep the default selections for the other configuration settings for your instance, including the Amazon Linux AMI.
  4. Under Network, enter the following:
    1. Select Edit, and choose eksctl-ipv6-quickstart-cluster/VPC for VPC.
    2. Keep the default selections for the other network settings, including the subnets and security group.
      EC2 Console dialog for launching a new instance showing networking configuration
  5. Click Launch instance, and select Proceed without key pair, Proceed without key pair, then Launch instance.
    EC2 dialog asking how to configure the keypair to access the instance with "Proceed without keypair" selected

Connect to the Linux EC2 Bastion Host

  1. After your instance has launched, select your instance (e.g., i-0a001fe6790332b87).
    EC2 Dashboard in the AWS console with a green banner showing that the instance was launched successfully
  2. After selecting your instance, click the Connect button.
    EC2 Console with the bastion instance selected
  3. On the Connect to instance page:
    1. Keep the default selections for the network settings, including “Connect using EC2 Instance Connect” and “User name.”
    2. Click Connect.
      EC2 instance dialog to connect to the instance
You should see the following connection terminal:
Terminal showing a dove as ascii art and the details of the instance connected to
Congratulations! You now have a fully operational Amazon EKS Cluster with IPv6 networking, ready to tackle the growing demands of globally scalable applications. Your transition to IPv6 has set the stage for a future-proof networking environment, capable of supporting the exponential growth of internet-enabled applications.

(Optional) Step 5: Deploy a Sample Application

Now, we’re all set to launch a sample application and enable its accessibility on the internet through an Application Load Balancer. For step-by-step guidance, check out the tutorial at Exposing and Grouping Applications using the AWS Load Balancer Controller (LBC) on an EKS IPv6 Cluster. This tutorial will guide you through the required Ingress annotations for the AWS Application Load Balancer Controller (LBC), an essential mechanism for controlling external access to services within an EKS cluster. You’ll also explore Ingress Groupings, a sophisticated feature that amalgamates multiple Ingress resources into one Application Load Balancer (ALB), enhancing both efficiency and ALB management.

Clean Up

To avoid incurring future charges, you should delete the resources created during this tutorial. You can delete the EKS cluster with the following command:
Upon completion, you should see the following response output:

Conclusion

Upon completion of this tutorial, you will have successfully established an Amazon EKS Cluster with IPv6 networking and deployed a network configuration. The IPv6 in EKS clusters enables the efficient and streamlined deployment of applications, allowing for more pods per node without exhausting IP addresses. IPv6 on EKS can also simplify the routing configuration of your EKS cluster. However, it's worth carefully considering specific key factors when designing your EKS cluster with IPv6 support. To deploy a scalable network, you need to set up configurations like preconfigured add-ons. These final installations will provide you with a robust, fully functional environment, ready for deploying Kubernetes workloads to your IPv6-enabled EKS clusters.
 

Any opinions in this post are those of the individual author and may not reflect the opinions of AWS.

Comments